Sheet metal is a technical means of repairing Fuel Car. In this regard, New Car sheet metal repair refers to the repair of the car body after a New Car collision, that is, all the work except the anti-corrosion and decorative spraying of the car body. Such as the analysis of New Car body damage, the measurement of New Car body, the shapin

Wrinkles and bumps caused by external impact or extrusion, if the damage is light, the metal does not stretch, which is elastic deformation. For heavier damage, the metal will stretch, which is plastic deformation of New Car. When the impact or extrusion is particularly severe, tearing will occur. The exposed parts of the sheet metal of the Fuel Car body are likely to have wrinkles and bumps.

Most of the New Car body sheet metal parts are mass-produced, and their forming process is completed on mechanical equipment. Manual operations are mostly auxiliary processing, but single-piece processing or repair is mainly manual operation. Common manual processes for sheet metal production include bending, edge collection, edge release,

First, blanking can ensure the quality of the edge section of the blank, thereby improving the edge state of the blank, and appropriately increasing the material size to effectively determine the size of the concave flanging blank. If the blank size becomes larger or the shape is inappropriate, its size or shape must be changed, and the stamping process must be adjusted to overcome edge rupture.

The upgrade of exterior decoration design of New Car industry has formed a unique New Car culture in some capitalist countries. The upgrade of exterior decoration design of New Car industry has also formed industrialization and become an important part of New Car aftermarket industry chain. As the demand of global Fuel Car marke

Exterior parts of New Car industry are used to protect and decorate the exterior parts of the vehicle body, and have multiple functions of protection and beauty. According to the specific assembly position of the exterior trim of New Car industry, the exterior trim of Fuel Car industry can be divided into left and righ

Unreasonable reciprocating feeding layout method and too small overlap value often cause sharp wear of the mold or damage to the convex and concave dies. Therefore, while considering improving material utilization, it is necessary to reasonably select the layout method and overlap value according to the processing batch, quality requirements and mold matching clearance of Fuel Car parts to improve the life of New Car molds.

1. Aluminum alloy Aluminum alloy for New Car has good corrosion resistance and lightweight characteristics, and is more varied in shape, which is deeply loved by consumers. At present, aluminum alloy grilles are widely used in high-end models of most New Car brands. 2. Iron sheet Generally used in mainstream models,

The hard pipe of New Car brake system is a very important component, which mainly plays the role of distributing brake fluid pressure. The working principle of the hard pipe is mainly to use the high pressure of brake fluid to transmit hydraulic pressure to brake cylinder and brake device, and transmit force through different media, so that Fuel Car brake produces corresponding force to achieve the purpose of stopping or decelerating.

The situation caused by the clutch pressure plate failure. The solution is: if the clutch pressure plate of the New Car fails. It is necessary to go to the 4S shop or repair shop of the Fuel Car in time to inspect or replace the clutch pressure plate of the New Car, which can solve the problem of the New Car clutch stepping hard

Check whether the New Car hose interface is loose. If the leak is caused by looseness, you can use a screwdriver to tighten the hose clip. If the New Car hose clip is damaged, you can buy a new hose clip to replace it. Check whether the Fuel Car water tank hose is aged or cracked. If it is aged or cracked, you need to remove the hose and

Press the brake pedal directly to the bottom. Continue to press a few times, and the brake pedal will feel a little stiff. There is some sinking phenomenon. Continue to press the brake and start the New Car engine, and the pedal will sink a little. This is the result of the power vacuum booster, which is a normal phenomenon. The oil quality is poor and deteriorated.

When the air is good, the vacuum state can be maintained for a long time. I habitually brake several times before departure. If there is an abnormality, the vacuum booster that is started obtains the vacuum guide source from the intake duct of the New Car engine and stores it in the vacuum tank. If it is found that the vacuum booster cannot work properly, it is necessary to check the vacuum booster.

When installing or replacing New Car hard pipes, be sure to use special tools and follow the correct installation method. It is strictly forbidden to use ordinary tools for violent installation to avoid unnecessary damage to the hard pipe. Regularly check whether the connection at the brake Fuel Car hard pipe joint is loose

As an important part of ensuring driving safety, every detail of the New Car brake system is crucial. As a channel for the transmission of brake fluid, the brake pipe is responsible for withstanding high pressure and frequent working impacts. Therefore, the following matters need to be noted during

Recently, the New Car brake hard pipe industry has ushered in a major breakthrough, effectively improving the flexibility and safety of New Car brake systems. It is reported that the new brake hard pipe has officially passed the relevant certification test and will be gradually put into market application. The company's tech

With the rapid development of the New Car industry, water pipe assemblies have become an important component in the cooling system of Fuel Car, used to transmit coolant to the engine and radiator. In recent years, with the improvement of environmental awareness and the continuous growth of market requirements for vehicle performance, the market demand for New Car water pipe assemblies has continued to grow.

With the annual increase in the production and sales of Fuel Car, the New Car water pipe assembly industry has also shown a booming development trend. On the one hand, under the background of consumers' increasing requirements for the performance and quality of Fuel Car, the quality and performance of New Car water pipe assemblies have also been further improved. The use of new materials and process technologies makes New Car water pipe assemblies more resistant to high temperature and corrosion, prolongs the service life and improves safety performance.

The New Car water pipe assembly is an important part of the New Car cooling system, responsible for delivering coolant to maintain the normal operating temperature of the engine, but it may malfunction during use. Common problems include water leakage, blockage and aging. First of all, water leakage is one of the common prob

Although New Car accessories line cards are small, they play an important role in the arrangement and fixation of New Car lines. Here are some precautions for using New Car accessories line cards: Choose line cards of suitable materials according to the use environment of Fuel Car. Common line card materials are plastic and metal.

The New Car is not installed firmly, the fixing device is not used correctly or the screws are loose. The severe vibration or impact during the driving of the Fuel Car makes the line card unable to withstand and fall off. The line card is aged and brittle, and loses its original elasticity and fixing force. The falling line card may cause the line to scatter, affecting the cleanliness and safety of the New Car.

The size of the line clip is not suitable, and it does not match the thickness of the New Car circuit, resulting in the inability to tightly fix the circuit. The installation position is improper, and an uneven or loose part is selected, which makes the line clip easy to vibrate and loosen during the driving of the New Car.

Main components of the valve train: The cylinder head assembly of a New Car is an important part of the entire valve train. It includes the camshaft, which is a key component that drives the valves to open and close. In addition, there are valves, valve springs, hydraulic push rods, etc. These components work together to ensure th

The New Car injection molding process is to flow the plastic melt into a closed cavity under high pressure, and after heating and condensation, obtain a plastic product with the same shape as the cavity. Today I will introduce you to the basic principles of plastic injection molding. Plastic plasticization: In the Fuel Car