I believe everyone must be familiar with
Used Car, because we can often see Used Car on the road now, but they are relatively unfamiliar to some novices. So how do you drive an
Used Electric Car?
1. The difference between Used Car and cars lies in their different power systems. Used Car use electric drive as power, and the power system is composed of a battery motor and electronic control, while a traditional car is composed of a fuel engine, transmission, etc. In fact, Used Car also borrow many technologies from cars, and the driving operation is close to the style of a car's automatic transmission, so it is also very convenient to operate.
2. Used Car refer to the use of unconventional vehicle fuels as the power source (or the use of conventional vehicle fuels and new vehicle power devices), integrating vehicle power control and drive technologies, forming technical principles and new features. Technology, new structure of cars.
3. Operation must be carried out in accordance with the operating requirements of the "Used
Electric Car Instruction Manual". Overloading and overloading are strictly prohibited. If overloaded regularly, the battery and generator will be damaged and may cause safety issues. The battery cannot be left alone for a long time and should be charged at least once a month. It must be charged and stored, otherwise the battery life will be affected.
4. Although Used Car do not have a gearbox, they still have a gear switch. If we want to start the vehicle, we must first step on the brake pedal to energize the vehicle, then press the start button, then rotate the gear to D and release the handbrake. , release the brake pedal and lightly press the accelerator pedal (to be precise, it should be the electric pedal), thus completing the start.
5. Pay attention to the display on the front instrument panel. After the power is turned on, the whole vehicle is in an electric operation state. The red power indicator light glows, and the green and yellow battery indicator lights illuminate at the same time. As the operation consumes power, when the green light and yellow light go out, it means that the battery power is about to be exhausted, and you should stop at this moment. Run it and charge the battery as soon as possible.
6. When you want to stop, release the power pedal, step on the brake, wait for the car to stop, rotate the gear to N, and then directly apply the handbrake (if there is an electronic handbrake, lift the button up), and then Press the flameout button to get it done.
