Nowadays, the continuous improvement of production and processing technology has also made the quality of plastic products better and better. Everyone knows that plastic products are commonly used products in our lives, and our lives cannot do without the use of these products. Speaking of processing technology,
New Car injection molding is a widely used process in the field of plastics. However, New Car injection molding also has influencing conditions. The following editor will tell you about this content.
New Car injection molding is now widely used in our lives, so let's understand its influencing conditions. In the process of New Car injection molding, due to the volume change caused by crystallization, the pressure of New Car injection molding is high, the viscosity difference of molten material is small, the shear stress between layers is small, and the elastic rebound after demolding is large. Therefore, the shrinkage of
Fuel Car injection molding can also be reduced appropriately. The material temperature is high and the shrinkage is large during New Car injection molding, but its directionality is small.
Pressure During New Car injection molding, the molten material is greatly affected by shear, especially PE and POM are more sensitive, so the pressure during Fuel Car injection molding should be adjusted during molding to control fluidity. During molding, the material temperature, mold temperature, pressure, injection speed and other factors can also be controlled to properly adjust the filling situation to meet the molding needs.
I believe that with the continuous development of society, the development of plastic products in our country will get better and better, so the requirements for plastic processing technology will become higher and higher. Therefore, whether it is Fuel Car injection molding or other processing technology, we need to continue to improve and innovate and improve processing technology. I believe that with continuous improvement, this field can also develop better.
