1. Fill
Used Car engine coolant: Re-tighten the drain plugs of the radiator and Used Car engine, and reconnect the reservoir hose. Slowly pour the prepared coolant into the radiator filling hole, and fill the reservoir to the "full" mark in the same way. Reinstall the radiator cap.
3. Liquid leakage
4. Pedal performance. Pedal height
5. Pedal free travel (1 Pedal height adjustment: loosen the limit bolt locking nut; turn the limit bolt until the pedal height is correct; tighten the limit bolt locking nut
6. Pedal free travel adjustment: loosen the push rod locking nut; turn the pedal push rod until the pedal free travel is correct; tighten the push rod locking nut; after adjusting the pedal free travel, check the pedal height)
7. Check the clutch separation point of Used
Fuel Car8. Check the wear, noise, and weight of the Used Car clutch
9. Fluid level check: When the Used Car engine is idling, turn the steering wheel several times while keeping the Used Car stationary so that the steering fluid temperature rises to between 40 and 80°C, and then turn the steering wheel to the middle position.
Stop the Used Car engine and check whether the liquid level in the reservoir is within the specified range; check whether the liquid level deviation of the Used Car engine running and stopping is within 5mm, and check whether the liquid level is foaming or emulsified.
