1. Check the fault of the
New Car tire. Before changing the tire, you should check which tire has a problem. Generally, the tires in the following situations need to be replaced: the tread depth of the
Fuel Car tire is seriously worn; the tire is seriously punctured and leaked; the tire has serious eccentric wear, etc.
2. Remove the New Car wheel. First use a wrench to loosen the wheel fixing screws, usually five or six fixing screws. Do not take them out after loosening. Lift the vehicle to a suitable height, and then remove the screws before removing the wheel from the wheel hub.
3. Preparation process for stripping the New Car tire. Deflate the removed wheel, remove the balance block on the rim, and then use a tire stripper to separate the tire from the rim.
4. Tire stripping with a tire stripper. Use a tire stripper to separate the tire from the inner edge of the rim, then place the prepared Fuel Car wheel on the tire stripper, fix the tire with the tire stripper clamp, and then insert a pry bar into the tire seam, control the rotation of the wheel through the pedal to separate the tire from the rim, and remove the tire from the tire stripper.
5. Install the new tire. After removing the old tire, put the new tire on the rim in the direction, and then fix the uninstalled tire on the tire changer in the same way, and put the tire on the rim by manually assisting the tire changer to rotate the wheel. After installation, inflate the tire. During the inflation process, you will hear two popping sounds from the tire, which means that the tire is in place.
6. Install the Fuel Car wheel. Install the wheel with the replaced New Car tire on the wheel hub and tighten the screws. Adjust the tire pressure of each tire, reset the tire pressure, and test drive.
