1. Pressure
The action pressure provided by the pressure system (oil pump) or servo motor of the
New Car injection molding machine is mainly used in various action programs such as injection device, melt device, mold opening and locking device, ejection device, shooting table device, core pulling device, etc. After the relevant parameters are input into the control panel of the New Car injection molding machine, the processor converts them into signals of each program action, thereby controlling the pressure required for the execution of each action program.
2. Speed
The above pressure is used to complete the required activity speed (flow rate of system hydraulic oil) of each action program. The basic level of speed is divided into: slow flow 0.1-10, slow speed 11-30, medium speed 31-60, high speed 61-99.
The control of injection speed is applied to different product structures and materials to set the size value. Here, we will not distinguish (engineering/general plastics, crystalline/non-crystalline plastics, high temperature/low temperature plastics, soft/hard plastics) as it is easy to confuse people. Let's make a more understandable explanation. The injection speed is a process factor that is difficult to control in
Fuel Car injection molding. Unlike other process factors, there are standard data for reference.
