It usually costs 500 yuan to replace the engine bracket of a
New Car. The rubber plate is used to fix and buffer the vibration of the vehicle during driving. When the
Fuel Car engine vibrates when the cold car is started and the rear gear is engaged, or when the Fuel Car engine vibrates on some bumpy roads during driving, it also means that the rubber plate needs to be replaced. When changing, the method is to first find a slope with an inclination and try to pull the front of the car up. After stretching it out, it is more convenient to use.
The inclination to be found is not high, so put something under the tire. One side is not high, so lift it up with a hydraulic jack. Be sure to tighten the brakes before and after the rear tire to prevent the vehicle from rolling over. Your life is at stake. After completing everything, we can first remove the air filter box, then remove the two screws on the top, and then drag the air filter box out.
The air inlet is covered with plastic wrap to prevent objects from entering. The air filter box is removed together with the air inlet. The air inlet is pressed into the car with a card and can be disassembled and assembled with a light ice sled. Don't remove the screws first. You have to use a hydraulic jack to support the Fuel Car engine. To support the Fuel Car engine, you need to remove the rain shield first. This is also the main reason why the front of the car needs to be raised. It takes some force to remove it, and the screws are rusted together.
