The center console of a New Car is the center of the interior of a Fuel Car and is a key component for the operation and control of various function keys. Because it is often used, the center console is also a very dirty part. If it is well maintained, the center console will look clean. If it is not properly maintained, it will make people feel dirty and will drop several grades in an instant. 1. Prepare cleaning tools Due to the complexity of the center console of a New Car, the demand for cleaning tools is also diverse, and you need to choose a professional cleaning agent. Use a neutral detergent, which can neutralize many chemical elements without damaging decorative accessories. In addition to special tools, cotton swabs and brushes are also indispensable. The dust in some small gaps is difficult to clean, and it is very convenient to use these small cleaning tools. 2. Clean the center console Since the entire center console is large in area, you can wipe the dust on the outer layer of the center console with a damp cloth dipped in a special cleaner. Be sure to wipe it clean, do not leave dust, and do not leave water droplets on the center console. When wiping the dashboard, you need to solve it quickly to prevent the dashboard from aging faster, while also maintaining the cleanliness of the dial. When you wipe the display screen of a Fuel Car, you should be careful. Wipe the screen once with a cloth dipped in water, and then use a brush to clean the gap of the screen frame, so that the display screen will be much cleaner. 3. Waxing and polishing Now many center console designs will choose piano glass paint as a decorativ

New Car play a very important role in our daily life. There are many Fuel Car interior parts in New Car. These Fuel Car interior parts not only play an important decorative role in New Car, but also have some very good characteristics.     In daily life, we must pay attention to the cleaning of Fuel Car interior parts and keep the car clean, so that people sitting in the car will feel happy. The dust in the car should be removed, large stains should be removed, and then the dust in the carpet and seat gaps should be sucked away with a vacuum cleaner. The center console and Fuel Car steering wheel are mostly plastic and leather, which are easy to adhere to dust. You can choose a cost-effective panel wax spray, and then wipe it with a clean cotton cloth. Cleaning of the car roof: The car roof is generally not easy to be stained with other wastes. You only need to use foam cleaning fluid to clean the car roof.

When using New Car, it is necessary to carry out some daily maintenance frequently. In the process of maintenance, cleaning is a very important step. The appropriate cleaning method not only makes the cleaning effect better, but also a kind of maintenance for New Car, because it is easy to cause some damage if you are not careful during cleaning. The manufacturer of Fuel Car interior parts will help you understand more. You should pay attention to cleaning after the Fuel Car cover is taken out. Especially in summer, do not clean New Car under strong sunlight, which will cause the Fuel Car engine to age prematurely. Secondly, you should pay attention to different cleaning methods and different towels for different dirt. Pay attention to scientific research and maintenance of Fuel Car body paint. Because the Fuel Car paint is exposed to the air for a long time, it is polluted and damaged by dirty air, asphalt and sand, and the paint is easy to fall off. Therefore, do not use hard cleaning such as plastic brushes, ordinary cotton towels or old coarse cloth to wipe the car to avoid scratches. In addition, in order to better maintain the gloss of the car paint, the car should be polished regularly.

1. Fuel Car wiper blades The life of wiper blades varies according to their own quality and the use environment, and usually the life span ranges from 2 to 4 years. Of course, it depends on the use of the wiper. If the surface is deformed by pressure or scratched by hard objects, it needs to be replaced in time. In addition, the owner should spray a little glass liquid with good lubricity before using the wiper to prevent the Fuel Car wiper blade from "dry scraping". When purchasing Fuel Car wiper blades, the owner can touch the rubber wiper surface with his fingers. If the blade is found to be aging, hardened, cracked, and the rubber blade is not elastic, it can be determined to be a counterfeit product. 2. Fuel Car engine lubricant Generally, the manufacturers of naturally aspirated engine models sold in China will require users to replace the lubricant when driving 5,000 kilometers to 15,000 kilometers, while the supercharged New Car engine models require replacement when driving 5,000 kilometers. If the car is not driven much or has been in a state of suspension, the Fuel Car engine oil should be replaced every six months. Of course, if the environment and oil quality you are in are good, you can appropriately extend the oil change cycle and time. 3. New Car oil filter The function of the New Car oil filter is to filter out debris, colloid and water in the oil, so it should be replaced together with the New Car oil. If it is not replaced, the New Car oil will not be filtered, which will cause the internal parts of the New Car engine to wear faster due to impurities in the New Car oil. 4. Air filter If the filter is severely blocked, the intak

As the upstream industry of New Car complete vehicle industry, Fuel Car parts industry is the foundation of New Car industry development and the prerequisite for supporting the sustained and steady development of Fuel Car industry. Its upstream industries are mainly steel, petroleum, nonferrous metals, natural rubber, fabric and other materials industries, and its downstream industries are mainly vehicle assembly industry and maintenance service industry. The development of New Car parts industry mainly depends on the development of downstream vehicle market and service and maintenance market. With the continuous advancement of economic globalization and the increasingly detailed division of labor, New Car manufacturers are gradually shifting to a streamlined organization and a specialized production model focusing on vehicle development. While expanding production capacity, vehicle manufacturers cooperate with external high-quality New Car parts professional manufacturers to form a supporting supply relationship, thereby promoting the rapid development of New Car parts industry and generating huge and continuous market demand.

As winter approaches, many car owners are more or less unfamiliar with winter car use. Many customers who come to buy Fuel Car also know very little about winter maintenance, especially winter car warming is a concern for many New Car users. Nowadays, the weather is getting colder. If you start the car without warming it up and drive away directly, it will cause great damage to the New Car engine. Because the temperature is low in winter, and the normal operating temperature of the Fuel Car engine is around 90℃, this will form a huge temperature difference. If you drive directly on the road at this time, it will seriously affect the operation of the New Car engine. Therefore, it is very necessary to warm up the car in place before driving in winter. The so-called warming up means that after the Fuel Car engine is started, wait for one or two minutes in place before driving, so that the New Car engine and gearbox can be preheated. Secondly, grasp the warming up time, within three minutes. In winter, the warming up of the car in place should not exceed three minutes. After one minute of starting, you can drive slowly, but not too fast, so as to ensure uniform heating of the car, without damaging the car, and well protect the New Car engine. Again, don't rush to turn on the heater after getting in the car. In winter, many car owners are eager to turn on the heater as soon as they get in the car, but this is actually wrong. The heat of the New Car heater comes from the residual heat of the New Car engine. When the car is just started, the New Car is in the warm-up stage and is not at a normal working temperature. Turning on the heater at this time will increase the circulation lin

1. Fill half or 2/3 of the tank when driving in the city Because New Car in the city often stop and go, if you fill the tank, it will increase the load on the engine, and the start will be weak and the Fuel Car will consume fuel. Moreover, there are many gas stations in the city, so there is no need to worry about not being able to find a gas station. 2. If you rarely drive a Fuel Car, it is recommended to keep the oil level at a low level 3. If you find a tanker truck, please find the next one If you are about to enter a gas station and find a tanker truck parked on the tank, please turn the car around and continue to find the next gas station. Because the oil added by the tanker truck will surge up the sediment at the bottom of the tank for many years, it is very likely to be added to your tank. If these impurities enter the engine cylinder, it will affect the service life of the engine. 7. Do not refuel after a typhoon or heavy rain Although New Car is stored underground, there may be some leakage over time. After a heavy rain, rainwater that cannot be discharged in time may leak into the tank, which will also affect the engine life of the Fuel Car.

1. Choose a regular gas station In recent years, many manufacturers have used the "oil quality" problem to prevaricate car owners, and transferred part of the responsibility for the quality problems of New Car bodies to oil products. The oil quality of Sinopec and PetroChina's direct gas stations is guaranteed. Never refuel at a small gas station that looks unpleasant; at the same time, you must keep it well, in case of an accident, this is the only proof. It is not a long-term solution to be greedy for small profits and trust those so-called low-priced Fuel Car. When the New Car really has problems due to oil quality problems, it will be too late to regret. 2. Choose to refuel in the morning or evening Fuel Car should avoid refueling when the sun is toxic and the temperature is high at noon. For example: The underground oil storage tank of the gas station is only warm from 5 to 8 in the morning (summer) and 5 to 9:30 (spring, autumn, and winter). At this time, because Fuel Car is charged by volume rather than weight, the volume will be affected by temperature. When refueling in the morning or evening, the same volume of Fuel Car can have more quality, and after accumulating a little, it can save a lot of money. 3. Try to fill up by liters Never fill up by the amount of money, because after rounding off, you will often lose money invisibly.

1. The first maintenance of New Car accessories: the running-in of mechanical parts will have a higher demand for lubricating oil. 2. Second maintenance: It is very important to replace the brake pads of Fuel Car every 40,000-60,000 kilometers. The second maintenance involves the inspection and maintenance of 63 items such as the engine, automatic transmission, air conditioning system, steering system, braking system, suspension system, body part, and tires. 3. Pay attention to the signs of tire wear of Fuel Car: replace the spare tire and tire with standard tires as much as possible to extend their service life. 4. The three filters should be replaced frequently, the purpose is to clean the engine oil and fuel, so as to protect the normal operation of the New Car engine. 5. Loose ball head affects steering: check whether the tie rod and ball head are damaged. If the ball head is loose, the free travel of the steering wheel becomes larger and the direction becomes inaccurate. 6. New Car lighting inspection improves driving safety. 7. Before driving long distances, New Car owners can do a maintenance or inspection. In fact, pay more attention to maintenance, find and solve problems in time, and do a good job of seven-tenths maintenance, which can really save a lot of maintenance costs.

1. Same specifications: New Car tires of different specifications have different outer diameters and cross-sectional widths after inflation, and the load distribution is different when installed on the same axle. 2. Same structure: Due to the different carcass structures of radial tires and bias tires, their cushioning performance and circumferential deformation are different. If two types of Fuel Car tires are mixed on the same axle, the loads they bear must be different, and the wear is also inconsistent. 3. Same material: The material mainly refers to the material of the carcass cord. For example, the carcass thickness, cord strength, and heat dissipation performance of all-steel radial New Car tires and fiber radial Fuel Car tires are quite different, and mixing them together affects the use effect. 4. Same level: The level is the load level of the New Car tire, and the corresponding air pressure standard is determined at the same time. New Car tires with different load capacities are mixed together, and the inflation pressure is inconsistent, and the deformation of the Fuel Car tires is also different. 5. Same pattern: The patterns of New Car tires are different, not only the wear is different, but also the adhesion to the ground is different. The patterns of the left and right New Car tires are inconsistent, which will affect the smoothness of the Fuel Car, and there will be unilateral and tail swinging phenomena during emergency braking. 6. Same brand: Different manufacturers have different wheel sizes, tread widths, pattern shapes, and cord materials for New Car tires. Mixing New Car tires of different brands will affect the use effect. 7. Same air pr

1. When replacing New Car tires, you need to measure the balance after disassembling and installing the tires. It is usually impossible to distribute the weight evenly after the tire is installed on the rim. Use a balancing machine to test the balance of the tire rim in motion, and use a balance block to counterweight the unbalanced point to ensure that the tire can run smoothly and avoid shaking; 2. When replacing a new tire, you need to replace a new valve. Because the valve is a rubber product, it will age over time. When replacing a new tire, there may be no problem with the valve at the time, but during the service life of the new tire, the valve may age prematurely, causing safety hazards; 3. Pay attention to checking the tire pressure frequently to avoid excessive or low pressure, which will have a bad impact on driving; 4. It is recommended to do a four-wheel alignment when replacing a new tire. Front wheel alignment includes four items: kingpin castor angle, kingpin inclination angle, front wheel camber angle and front wheel toe. Rear wheel alignment includes wheel camber angle and rear wheel toe one by one. This is also commonly known as four-wheel alignment. The function of wheel alignment is to enable Fuel Car to maintain stable straight driving and easy steering, and to reduce the wear of tires and steering parts during driving.

1. Check the fault of the New Car tire. Before changing the tire, you should check which tire has a problem. Generally, the tires in the following situations need to be replaced: the tread depth of the Fuel Car tire is seriously worn; the tire is seriously punctured and leaked; the tire has serious eccentric wear, etc. 2. Remove the New Car wheel. First use a wrench to loosen the wheel fixing screws, usually five or six fixing screws. Do not take them out after loosening. Lift the vehicle to a suitable height, and then remove the screws before removing the wheel from the wheel hub. 3. Preparation process for stripping the New Car tire. Deflate the removed wheel, remove the balance block on the rim, and then use a tire stripper to separate the tire from the rim. 4. Tire stripping with a tire stripper. Use a tire stripper to separate the tire from the inner edge of the rim, then place the prepared Fuel Car wheel on the tire stripper, fix the tire with the tire stripper clamp, and then insert a pry bar into the tire seam, control the rotation of the wheel through the pedal to separate the tire from the rim, and remove the tire from the tire stripper. 5. Install the new tire. After removing the old tire, put the new tire on the rim in the direction, and then fix the uninstalled tire on the tire changer in the same way, and put the tire on the rim by manually assisting the tire changer to rotate the wheel. After installation, inflate the tire. During the inflation process, you will hear two popping sounds from the tire, which means that the tire is in place. 6. Install the Fuel Car wheel. Install the wheel with the replaced New Car tire on the wheel hub and tig

In daily life, many car buyers will encounter some problems in the maintenance of New Car. Before sending their beautiful cars to the repair shop for repairs, car buyers do not know the causes. Here are the common Fuel Car failures. problem. When a Fuel Car is running at a high speed, the speed reaches 150 kilometers, but the gas is not upshifted immediately, and the speed is already more than 4,000 rpm. I would like to ask what is the reason for this? Reason: When the steam pressure relay fails, the automatic transmission will enter the slope mode and will be forced to drive in third gear. This failure is a pressure adjustment failure. You must go to the store for inspection immediately. First, replace the gearbox oil and try it. Try it. If it continues to lock in the third gear after changing the oil, then the relay needs to be replaced. While driving, I always feel that the Fuel Car is not cooled enough. I would like to ask if it should be refrigerant? Cause: The most common cause of insufficient refrigerant is a small amount of refrigerant leaking in the system. If there is not enough refrigerant in the air conditioning unit, the amount of refrigerant sprayed from the air conditioning expansion valve to the air conditioning evaporator will inevitably decrease. When the refrigerant evaporates in the air conditioning evaporator, the amount of heat absorbed will also decrease, and the air conditioning cooling capacity will decrease. It also decreased. It is recommended to drive the Fuel Car back to the 4S shop or maintenance shop for inspection first. If the inspection result says that there is no need to add it, there is no need to add it, because too much refrigerant is not g

In winter, the weather is dry and the temperature is low, and New Car always have some problems. In this case, many car owners react that fuel consumption has increased. In fact, in this case, it is normal for the temperature to drop and fuel consumption to increase. After all, the weather is very cold, and it will increase fuel consumption in advance. When the heater is turned on, it is normal for fuel consumption to increase by about 1 liter, but if your fuel consumption per 100 kilometers suddenly increases by 45 liters, you should look for problems from yourself. What aspects can reduce fuel consumption? If you find that the sliding distance of your Fuel Car is significantly shortened while driving, you should check whether the tire pressure meets the air pressure standard. If the tire is underinflated, fuel consumption will also increase; in addition, if the tire is severely worn, it will often slip and increase fuel consumption. If the spark plug is used for too long, fuel consumption will also increase. Because the damage of the spark plug will reduce the ignition energy, slow down the speed of the car, and cause a significant increase in New Car consumption. If you are used to heating the car for a long time when you go out in the morning, the engine will be useless, and wasting fuel is not conducive to environmental protection. The correct way is to wait until the engine idle speed drops from 1200 rpm to 800 rpm, and then preheat the Fuel Car while driving. Don't drive too fast. After driving one or two kilometers, the engine will reach the operating temperature. In general, pay more attention to the maintenance of New Car, especially the maintenance of the

In fact, the temperature changes in Used Fuel Car tires during driving do cause the air in the tires to expand and contract, but the change range can only reach about 0.5 bar in summer, which is also due to the nitrogen content in the air, so there is not much difference between ordinary air and nitrogen in this regard. In daily driving, most drivers will hardly notice the difference between nitrogen Used Fuel Car tires and ordinary Used Fuel Car tires when driving. However, in theory, nitrogen can indeed optimize the handling of Used Car. In professional racing, tiny details will affect the final success or failure, and the tire pressure of nitrogen Used Fuel Car tires is more stable, and the tire pressure value can be accurate to two decimal places, allowing the car to perform more extreme operations. In this regard, we may not need such god-level operations in daily driving, so improving this tiny handling is not very meaningful.

1. Please fill half or 2/3 of the tank when driving in the city Because driving in the city is often stopped and started, if you fill the tank, it will increase the load on the engine, the start will be weak and the vehicle will consume fuel. Moreover, there are many gas stations in the city, so there is no need to worry about not being able to find a gas station. 2. If the Used Fuel Car is rarely driven, it is recommended to keep the oil level at a low level 3. If you find a tanker truck, please find the next one If you are about to enter the gas station and find a tanker truck parked on the tank, please turn the car around and continue to find the next gas station. Because the oil added by the tanker truck will surge up the sediment at the bottom of the tank for many years, it is very likely to be added to your tank. If these impurities enter the engine cylinder, it will affect the service life of the engine. 4. Do not refuel after a typhoon or heavy rain Although gasoline is stored underground, there may be some leakage over time. After the heavy rain, the rainwater that cannot be discharged in time may leak into the tank, which will also affect the life of the Used Car engine.

1. Choose a regular refueling point In recent years, many Used Fuel Car manufacturers have used the "oil quality" problem to prevaricate car owners, and transferred part of the responsibility for the quality of the car body to the oil quality. The oil quality of Sinopec and PetroChina's direct gas stations is guaranteed. Never refuel at a small gas station that looks unpleasant; at the same time, you must keep it well, in case of an accident, this is the only proof. It is not a long-term solution to be greedy for small gains and trust those so-called low-priced gasoline. When Used Car really have problems due to oil quality problems, they will regret it. 2. Choose to refuel in the morning or evening Avoid refueling when the sun is toxic at noon and the temperature is high. For example: The underground oil storage tank of the gas station is only warm from 5 to 8 in the morning (summer) and 5 to 9:30 (spring, autumn, and winter). At this time, because gasoline is charged by volume rather than weight, the volume will be affected by temperature. When refueling in the morning or evening, the same volume of gasoline can have more quality, and after accumulating a little, it can save a lot of money. 3. Try to fill up by liters Never fill up by the amount of money, because after rounding off, you will often lose money invisibly.

1. Contact ablation: If the Used Car horn is easily in contact with the Used Car horn for a long time, impedance will be generated. The current flowing through the electromagnetic coil will weaken, and the electromagnetic attraction will not attract the armature to drive the diaphragm to vibrate normally, which will cause hoarseness or even no noise. But when the Used Fuel Car horn is pressed continuously, if the instantaneous strong current passes through the impedance and can still work normally, it is good or bad. 2. Poor sealing and easy to be affected by moisture: Although the interior of the Used Fuel Car horn is closed, if the Used Car is not sealed tightly, there is water vapor in the mist or in the air in the internal space, which can easily cause the contact to be damp and unable to work properly. 3. Poor contact of the solenoid terminal: Some of the internal solenoid coil enameled wire terminal joints are crimped with aluminum metal rivets, and the welding is not firm. If the insulating paint on the end enameled wire is not clean or the rivet is not pressed firmly, it is very easy to cause a virtual connection failure, resulting in poor operation of the Used Car horn. This failure is caused by the quality of the Used Car horn and cannot be repaired, but only replaced with new parts.

It is very cost-effective to spend more than 100 yuan to buy a spontaneous combustion insurance. Taking a new car worth 100,000 yuan as an example, the insured amount is only about 150 yuan. Of course, the rate of spontaneous combustion is not only related to the price of the car, but also to the age of the car. The older the car is, the higher the probability of spontaneous combustion, so the spontaneous combustion insurance rate will also increase accordingly. Taking a 100,000 yuan car as an example, if the car is 5 years old, the insured amount will have to be increased by 50 yuan. Under normal circumstances, the age rate of Used Car with an age of 2-6 years is about 0.2%. However, compared with the costs of possible spontaneous combustion, 200 yuan seems insignificant. Water wading insurance is also called engine special insurance. The insurance cost is not high. Generally, the premium for water wading loss insurance is 5% of the vehicle damage insurance premium. For a common family car worth 100,000 yuan, the premium for Used Fuel Car water wading insurance is generally around 80 yuan, and there are slight differences among major insurance companies. But buying water crossing insurance is not enough. If you want to get full compensation, the car owner must purchase vehicle damage insurance, water crossing insurance and vehicle damage insurance, and then purchase an additional insurance with no deductible. Summer is full of thunderstorms, and high temperatures can easily cause various Used Fuel Car problems. Considering many aspects can better ensure that your car can spend the summer safely.

There is a lot of rain in summer, and some car owners are greedy for convenience and directly wash their cars in the open air. However, if the car owner does not like to wash the car normally, a thick layer of dust will accumulate on the surface of the car paint, which will become a layer of mud when it rains. The mud will absorb water, and the surface of the car body will become dirtier and dirtier. At the same time, it will accelerate the erosion of the car body paint by acid rain. In fact, in addition to parking the Used Fuel Car in a cool place, car owners who have the conditions can wax and seal the car. This method is the same as applying sunscreen when going out. Waxing and sealing are both a layer of film on the car. You can build a good relationship with the salesperson when buying a car. I once had a friend who was familiar with the salesperson of the 4S store. After washing the car at the franchise store, it is generally not a problem to wax it for free. The weather in summer is like the face-changing of Peking Opera. The sun may be shining brightly in the last second, and there may be thunder and lightning in the next second. In summer, the topics that cannot be avoided must be the spontaneous combustion of Used Car and Used Car wading. It is naturally a good thing to prevent them before they happen, but sometimes the situation is beyond your control. What should you do? If you want to spend the summer safely, it is very important to buy car insurance. According to statistics from the fire department, the spontaneous combustion accidents of Used Car are concentrated from May to September every year, and the cause of spontaneous combustion is mostly caused by the line. The older the