In modern society, with the rapid development of science and technology, frequent thunderstorms are not necessarily a good thing for electronic products and Used Car parts, and Used Fuel Car are also prone to various faults in an exposed environment. As of the end of March 2017, the number of motor vehicles in the country has exceeded 300 million, which means that 300 million car owners may face problems such as damp parts, paint protection layer peeling, tire blowouts, and spontaneous combustion in the hot and rainy summer. The recent incident of 89 electric buses burning was also related to the high temperature. When the temperature was too high, the electric buses exposed to the open air would spontaneously combust. Judging from the above events, when the temperature is high, we must first consider the sun protection of Used Fuel Car. The first thing we need to pay attention to is the maintenance of Used Car lines. Car owners who have used the car for 5 years or even longer must pay attention to it. If the Used Car is not maintained for a long time, it is very likely that the line will be damaged, causing the Used Car to leak electricity, which will cause the Used Car to spontaneously combust. This is absolutely not sensational. If you smell plastic paste during a long driving process, you must stop immediately and check the line. Secondly, you must pay attention to tire pressure. Tire blowout is one of the frequent accidents of Used Fuel Car in summer. According to incomplete statistics, more than 42% of accidental traffic accidents on highways are caused by tire blowouts, which may even cause personal injury or death in severe cases. If you find that the tire tr

1. Used Car anti-skid mat Anti-skid mat for Used Fuel Car is also called vehicle anti-skid mat. It is an anti-skid mat placed on the dashboard of Used Fuel Car. Because it is made of polymer materials, it has strong adsorption capacity and can play an anti-skid role. It is to prevent the decorations placed on Used Fuel Car from sliding off. 2. Car curtains The main function of curtains is heat insulation and UV blocking. At the same time, it can also protect the privacy of car owners. 3. Carpet Carpet is an environmentally friendly Used Car interior component. It can effectively prevent the residual moisture and dirt on the soles from sliding between the clutch, brake and throttle, avoid safety hazards, and reduce the possibility of interior pollution and damage. After all, cleaning the foot mat is more convenient and economical than cleaning the interior. The thick base material can prevent chassis noise and tire noise and improve driving comfort. 4. Foot mat Used Car foot mat is a very practical Used Car product. It is mainly used to protect the main carpet, soundproof to improve driving comfort, vacuum and purify the air in the car, and beautify the interior space. It is very suitable for use in rainy and cold weather. It plays a very good role in helping drivers.

In order to solve the problems in the prior art that there are many Used Car accessories, many parts and hardware tools are required in the production and maintenance of Used Fuel Car, and many equipments are required to be carried by production personnel and maintenance personnel, which reduces the maintenance efficiency and is easy to confuse and inconvenience when installing different parts, the technicians designed an Used Car accessories storage device to classify and place the Used Car parts, facilitate access, and improve the maintenance efficiency. In order to achieve the above purpose, the Used Car accessories storage device is realized by the following technical scheme: an Used Car accessories storage device, including a storage rack, a drawer, a storage basket and a connecting device; the storage rack is divided into a plurality of compartments of different sizes from bottom to top by a transverse partition, the upper compartment is sealed around, and the top is provided with jacks of different sizes, which are connected to the upper compartment, and the opening on one side of the lower compartment is provided with mutually matching extraction boxes, and the side of the storage rack is connected with a storage basket. The connecting device includes a connecting block, a slider, a slider mounting groove and a connecting block locking groove arranged on the front and rear sides of the storage basket, the slider mounting groove is arranged on the opposite sides of the storage rack and connected to the storage basket, and the slider is installed in the slider mounting groove. And the compartments are divided from bottom to top from large to small. The bottom of

Used Car accessories are parts and accessories that constitute the whole of an Used Car and serve the Used Car, and are divided into: engine accessories, east-west accessories, brake accessories, steering accessories, walking accessories, electrical instrument accessories, Used Car lamps, Used Car modification, security and anti-theft, Used Car interior, Used Car exterior, comprehensive accessories, audio-visual appliances, chemical care, body and accessories, maintenance equipment, power tools, etc. Due to the large number of Used Car parts, in the production and maintenance process of Used Fuel Car, more parts and hardware tools are required, and the production and maintenance personnel need to carry more equipment, which reduces the maintenance efficiency. Moreover, most of the existing Used Car accessories storage devices place these Used Car parts in the form of storage slots, and most of them are deep, so that more Used Car parts can be stored in the same floor space, and the storage rack often has only one connected space. When installing different accessories, it is easy to confuse and very inconvenient. Therefore, it is necessary to design an Used Car accessories storage device that can classify and place Used Car accessories, facilitate access, and improve maintenance efficiency.

1. Car washing under the scorching sun - damage to car paint Many car owners like to wash their cars under the scorching sun, thinking that the water on the car body can be dried quickly after washing. In fact, it is wrong. When washing the car under the scorching sun, the convex lens effect formed by the water droplets will cause local high temperature on the upper layer of the car paint. Over time, the paint of the Used Car will lose its luster. If waxing is done at this time, it is also easy to cause uneven color of the car body. Therefore, car washing and waxing should be done under sheltered conditions as much as possible. If it cannot be guaranteed, try to choose cloudy or sunny mornings and evenings. 2. Car washing is like taking a bath - harming air conditioning In summer, the temperature rises, the dust increases, and the body of Used Fuel Car is easy to get dirty. The frequency of car owners washing cars also begins to increase. Many Used Car owners also hope to wash their cars as thoroughly as taking a bath. But it should be noted here that the appearance of the Used Car air conditioner must be kept dry. If the Used Car air conditioner is accidentally wet, it will affect the life of the Used Car air conditioner. 3. Too much oil - causing a malfunction When the oil in the oil pan of a Used Fuel Car engine is insufficient, the friction between the bearing and the journal will be poorly lubricated due to the small amount of oil, aggravating the degree of wear and even causing a bearing burnout accident.

Since the carbonization of Used Car brake pads can cause various safety hazards, it can endanger driving safety in serious cases. So what are the causes? ① Cause: The newly replaced Used Car brake pads are thicker, or the wrong Used Car brake pad model is installed. Solution: Install the correct model of Used Car brake pads. And after replacing the Used Car brake pads, turn the brake disc by hand to check whether there is any sticking phenomenon before testing the car. ② Cause: The high temperature resistance of Used Car brake pads is unqualified. According to national standards, the suitable working temperature of Used Car brake pads is 100-350℃. However, there are still inferior Used Fuel Car brake pads on the market that carbonize at 250℃, and the friction coefficient drops rapidly. Solution: Install regular Used Car brake pad products. ③ Cause: The Used Car brake pad sub-cylinder returns abnormally, the Used Fuel Car brake pad is stuck in the caliper groove or the caliper guide pin is stuck, causing drag brakes. Solution: Check the brake system and use the brake system maintenance kit to clean and maintain the relevant accessories. ④Cause: Continuous downhill driving and long braking Solution: When driving downhill continuously, you should lower the gear, turn on the auxiliary brake to control the speed, and do not brake continuously. If you need to brake, it should be effective immediately; the main reason for brake failure is that the brakes are used too frequently, and the brake pads of Used Fuel Car are too hot, causing the brakes to fail. Therefore, when driving downhill in mountainous areas, avoi

The friction components of Used Car brake pads are made of various metal fibers, organic matter, resin fibers and adhesives through high-temperature reaction die-casting. Used Fuel Car braking is carried out by friction between brake pads and brake discs, and friction will inevitably generate heat energy. When this temperature reaches a certain value, we will find that the brakes are smoking, accompanied by a pungent smell similar to burnt plastic. When the temperature exceeds the high temperature critical point of Used Fuel Car brake pads, the brake pads contain phenolic resin, styrene-butadiene masterbatch, stearic acid and other carbon-containing organic substances such as hydrogen and oxygen in the form of water molecules, leaving only a mixture containing a small amount of phosphorus, silicon and other carbon, so it looks gray and black after carbonization, in other words, it is burnt. 1. As the Used Car brake pads are carbonized, the friction material of the Used Car brake pads will turn into powder and fall off quickly until they are completely burned out, at which point the braking effect gradually weakens; 2. The brake disc is deformed due to high-temperature oxidation (that is, the brake pads we often see are blue-purple) and the deformation will cause vibration and abnormal noise at the rear of the car during high-speed braking; 3. High temperature causes the brake cylinder seal to deform, and the Used Car brake oil temperature rises. In severe cases, the brake cylinder may be damaged and the brake cannot be braked.

Recently, Chongqing Xinxuanyao Auto Sales Co., Ltd. (hereinafter referred to as "Chongqing Xinxuanyao Auto"), a leading enterprise in the field of automobile export trade, its president Ms. Han Shicong personally led the team to Horgos, Suifenhe, Manzhouli and other places for in-depth investigation and research. This move indicates that Chongqing Xinxuanyao Auto is accelerating its overseas business layout and further consolidating its leading position in the global automobile export market. As a leader in automobile export trade, Chongqing Xinxuanyao Auto has its business spread across the global market, providing high-quality automobile products and services to global customers. During this investigation and research, President Han Shicong and his team had an in-depth understanding of the market environment, policy advantages and logistics conditions in Horgos, Suifenhe, Manzhouli and other places, aiming to find the best solution for the company's future overseas business expansion and overseas warehouse establishment. During the inspection, the Chongqing Xinxuanyao Auto team had in-depth exchanges and communications with local government departments, industry associations and potential partners. President Han Shicong introduced in detail the development history, product advantages and future strategic planning of Chongqing Xinxuanyao Auto, and said that the company attaches great importance to cooperation opportunities with various regions and looks forward to opening a new chapter of mutually beneficial and win-win cooperation through joint efforts. It is reported that Chongqing Xinxuanyao Auto is expected to set up overseas warehouses in Horgos, Suifenhe, Manzhouli and other places next year. This will help

1. Used Fuel Car oil maintenance The maintenance cycle of Used Fuel Car oil mainly depends on the type of Used Fuel Car oil used. Generally, mineral oil is changed every 5000km, semi-synthetic oil is changed every 7500km, and fully synthetic oil is changed every 10000km. 2. The air filter is the same as the air conditioning filter. It is basically changed every 15000km, but the regulations of each car dealer are different. In fact, I think the most reliable way is to check it every time and change it if it is dirty. 3. The fuel filter is generally changed every 30000km, and there are differences between different car dealers. I personally think that a slightly longer time will not have much impact, but I want to tell you something dry. Note-The Spring Festival is coming soon, and many people have to drive back to the countryside for the New Year. Try not to go to those small gas stations to refuel. Some unscrupulous merchants have done something wrong. After refueling, the car will vomit and have diarrhea, and a series of problems such as engine fault lights, shaking, and refueling powerlessness will appear. 4. Maintenance of brake fluid. Generally, it is changed every 2 years and 40,000 km. How to say this? Many car owners will say that I have not changed it for five or six years. There is no problem. Why waste money to change it? The editor wants to say that because brake fluid is water-absorbent, the brakes will become soft over time, the braking distance will become longer, and it is very uncomfortable to drive. There are many specific ways, which will be explained in the future, so I will not go into details here. 5. Maintenance of spark plugs

1. Fill Used Car engine coolant: Re-tighten the drain plugs of the radiator and Used Car engine, and reconnect the reservoir hose. Slowly pour the prepared coolant into the radiator filling hole, and fill the reservoir to the "full" mark in the same way. Reinstall the radiator cap. 2. Check the clutch fluid level of Used Fuel Car 3. Liquid leakage 4. Pedal performance. Pedal height 5. Pedal free travel (1 Pedal height adjustment: loosen the limit bolt locking nut; turn the limit bolt until the pedal height is correct; tighten the limit bolt locking nut 6. Pedal free travel adjustment: loosen the push rod locking nut; turn the pedal push rod until the pedal free travel is correct; tighten the push rod locking nut; after adjusting the pedal free travel, check the pedal height) 7. Check the clutch separation point of Used Fuel Car 8. Check the wear, noise, and weight of the Used Car clutch 9. Fluid level check: When the Used Car engine is idling, turn the steering wheel several times while keeping the Used Car stationary so that the steering fluid temperature rises to between 40 and 80°C, and then turn the steering wheel to the middle position. Stop the Used Car engine and check whether the liquid level in the reservoir is within the specified range; check whether the liquid level deviation of the Used Car engine running and stopping is within 5mm, and check whether the liquid level is foaming or emulsified.

When buying Used Car accessories, we often worry about accidentally buying counterfeit and shoddy accessories and unsuitable accessories. So, how can we buy qualified and suitable accessories? Let's take a look at the detailed steps below! 1. Check whether the specifications and models are suitable Most Used Car accessories have specified models and technical parameters. For example, when purchasing electrical equipment, you should pay attention to check whether the voltage and power are consistent with the replaced Used Car parts; when purchasing transmission belts, you should pay attention to the model and circumference. 2. Check whether the trademark logo is complete The outer packaging of authentic products is of good quality, the writing on the packaging box is clear, and the overprinting color is bright. Some important parts such as generators, distributors, fuel injection pumps, etc. are also equipped with instruction manuals, certificates of conformity and inspector seals to guide users to use and maintain them correctly. You should carefully identify them when purchasing to prevent buying counterfeit and shoddy products. 3. Check whether the geometric dimensions are deformed Some Used Car parts are prone to deformation due to improper manufacturing, transportation and storage. When checking, you can roll the shaft Used Fuel Car parts along the glass plate to see if there is any light leakage at the joint between the Used Fuel Car parts and the glass plate to determine whether they are bent; when purchasing the clutch driven plate steel plate or friction plate, you can hold the steel plate and frictio

When the rear windshield is blocked, you will lose part of your rear view when driving on the road or reversing, which greatly reduces driving safety. Therefore, the rear Used Car wipers are equally important. The rear Used Car wipers of this model have three gear adjustments, namely slow, medium and fast. When encountering foreign objects blocking the view, the Used Fuel Car wipers should be sprayed forward or backward before the Used Car wipers work, so that the friction resistance of the entire Used Fuel Car wiper movement process can be reduced. So as to achieve the purpose of extending the life of Used Car wiper blades and preventing the glass from being scratched by foreign objects. Wiper blades are consumables. One-time purchase does not guarantee a lifetime benefit, so the service life of Used Car wipers should be extended through correct operation. Many people will ask, how long should Used Car wipers be replaced? Generally speaking, they should be replaced in one to two years. But our suggestion is: the effect of Used Car wipers is significantly reduced after hanging, so they should be replaced. And developing good usage habits can also help reduce scratches on the front windshield, so why not?

The small Used Car wiper blade is indeed the most indispensable part of Used Fuel Car. After a period of drought, it suddenly rains. If the Used Car wiper blade does not work, then sorry, you can only pull over and wait for the rain to stop. If you encounter a situation in the rain where the wipers cannot effectively remove the rain on the windshield, it is like a blind person driving and losing safety. According to relevant data, the traffic accident rate caused by the aging of Used Car wiper blades due to unclear vision is about 5 times higher than usual when driving in the rain. To avoid this situation, you must master the correct wiper operation method and maintenance knowledge, and regularly check and replace aging parts. 1. Introduction to the function of the wiper control lever The wiper lever of mainstream vehicles is generally on the right side of the steering wheel, and the wiper function is operated by up and down, front and back. It can adjust the front and rear wiper gears, frequencies and other performances. Some models are also equipped with an "automatic sensing" function, which will adjust the speed of the wipers according to the amount of rain, completely freeing your right hand to operate the wiper switch. 2. Wiper operation method Detailed introduction to the up and down operation method: This model's wiper will automatically rebound when pushed upward, and the wiper will work once. When pushed downward, it is divided into three gears (slow/medium/fast), which is a more mainstream design. Of course, the design of some models will be slightly different. Detailed explanation of front and rear operation:

The development trend of New Car in recent years is relatively good. Its rapid development is inseparable from the development of my country's economy. Here are some methods to extend the service life of Electric Car batteries? 1. When the Electric Car battery is discharged, the positive and negative electrode materials react with the sulfuric acid in the electrolyte to generate lead sulfate. Under normal circumstances, the generated lead sulfate has a loose structure, and its crystals are very small, and the electrochemical activity is very high. 2. It is strictly forbidden to short-circuit the positive and negative poles of the Electric Car battery, and it is forbidden to charge it frequently until the undervoltage protection circuit takes effect. It must be charged in time. 3. If it is found that the color of the light has not changed after 10 hours of continuous charging, it should be stopped immediately and the temperature of the battery should be checked to see if it is hot. The total charging time should be controlled not to exceed 8 hours, otherwise the battery will be damaged due to expansion and deformation. 4. It is also good for the battery to carry less heavy objects in New Car. The speed and brakes should be controlled to avoid high current discharge. When starting an Electric Car, the handle should be turned slowly, and sometimes it can be paused, and then continue to accelerate when the speed comes up. 5. Do not charge frequently. Too short a charging time has a great impact on the battery. If you charge the battery when not in use and unplug the power supply when you need to use it, regardless of whether it is fully charged or not, the battery lif

When charging a new Electric Car for the first time, it is not necessary to discharge the electricity before charging. Lead-acid batteries have no memory effect. It is generally recommended to charge the battery pack when the remaining capacity is 30% to 40%. It is generally not recommended to exceed 12 hours. In theory, the smaller the charging current, the better. Because the current is small, the smaller the crystals generated by the reaction, the more complete the reaction, and the more electricity can be stored. Moreover, the smaller the current, the smaller the heat of the battery, the less likely the plate is to deform, and it will not cause the effective material on the plate to fall off. The dedicated smart charger uses decay current charging, that is, a larger current is used at the beginning of charging. As the battery voltage rises, the charging current automatically decreases until the voltage reaches about 13V and the charging stops automatically. On rainy days, New Car should be parked in a place sheltered from the rain for charging, because water is a conductor. If you charge an Electric Car in the rain, you may get an electric shock; when charging an Electric Car, you should also pay attention to the positive and negative poles of the charger. If the positive and negative poles are reversed, the battery may be damaged. Therefore, strict attention is required in this regard.

Energy conservation and environmental protection have now been deeply rooted in people's hearts. New Car products have gradually gained market praise and become the mainstream of the automotive industry. Let me introduce to you what are the benefits of Electric Car? Electric Car are a special type of New Car. It easily set off a sales boom in the market and won the public's pursuit. At the same time, it continues to refresh sales in the market, has excellent product quality, perfect after-sales service guarantee, and high cost-effectiveness, which is more popular than other Electric Car. Although it is in the form of an New Car, its shape is very fashionable, making our New Car travel more stylish. Because of its advantages, it has gained great recognition in the market and has become a source of trust and confidence for franchisees. Electric Car are economical and environmentally friendly. They do not need to waste oil at all, and they will not pollute the air. They are a blessing for pedestrians; they occupy a small lane. China is a country with a large population. If cars are popularized, it will be a waste of resources. Electric Car are efficient and convenient. Instead, they are faster than cars, which is conducive to easing traffic congestion and reducing traffic pressure. In addition, it is extremely convenient for cyclists, and they don't have to worry about parking spaces.

As a type of modern transportation, Electric Car have shown significant advantages in energy conservation and emission reduction. These advantages not only help alleviate environmental pressure, but also promote sustainable development. The following will elaborate on the main advantages of Electric Car in terms of energy conservation and emission reduction. First, the core advantage of Electric Car is their zero-emission characteristics. Compared with traditional fuel vehicles, Electric Car do not produce exhaust emissions during driving, thereby avoiding the release of a large number of harmful gases such as carbon dioxide, carbon monoxide, and nitrogen oxides. This not only helps reduce air pollution, but also effectively combats global warming. Secondly, Electric Car are more energy efficient. The electricity used by Electric Car can be generated by a variety of renewable energy sources, such as solar energy, wind energy, etc. During the process of converting these energy sources into electrical energy, the energy loss is relatively small and no environmental pollution is caused. Traditional fuel vehicles, on the other hand, need to go through multiple links such as oil extraction, refining, and transportation. Their energy utilization efficiency is low and they have a great impact on the environment. In addition, Electric Car also have advantages in terms of noise pollution. The noise generated by Electric Car during driving is much less than that of fuel vehicles, providing urban residents with a quieter living environment. This in turn is of great significance for improving the quality of life of urban residents and reducing noise pollution. Furthermore, the widespread use of Electric

Electric Car use electric motors instead of fuel engines and are driven by electric motors without the need for automatic transmissions. Compared with automatic transmissions, motors have simple structures, mature technologies, and reliable operation. Traditional internal combustion engines can limit the speed when efficiently generating torque to a narrow range, which is why traditional internal combustion engine vehicles require large and complex transmission mechanisms; while electric motors can efficiently generate torque in a fairly wide speed range, and do not require gear shifting and transmission devices during the driving of New Car. They are easy to operate and have low noise. Compared with hybrid vehicles, Electric Car use a single source of electricity, and the electronic control system greatly reduces the internal mechanical transmission system of the vehicle, has a simpler structure, and also reduces the energy loss and noise caused by the friction of mechanical parts, saving space and weight inside the vehicle. The motor drive control system is the main executive structure of Electric Car during driving. The drive motor and its control system are one of the core components of Electric Car (battery, motor, electronic control). Its driving characteristics determine the main performance indicators of vehicle driving, and it is an important component of Electric Car. The three major categories of Electric Car, fuel cell vehicles (FCVs), hybrid Electric Car (HEVs) and Electric Car (EVs), all use electric motors to drive the wheels. Choosing a suitable electric motor is an important factor in improving the cost-effectiveness of various Electric Car. Therefore, it is

1. The impact of low temperature on battery life Usually, Electric Car use lithium iron phosphate batteries or ternary lithium batteries as energy storage devices. Charging and discharging is a chemical reaction process. When the temperature is low, the chemical reaction process is slower, and the charging and discharging speed is also affected accordingly. The low-temperature performance of lithium iron phosphate batteries is slightly worse, which has a greater impact on battery life attenuation. Reasonable battery temperature can not only ensure sufficient charging and discharging power, but also save electricity and extend battery life.   2. The impact of heat source on battery life Defrosting, another function related to warm air, will also consume some power. Whether the window is clear directly affects driving safety. Usually, the defrosting function is achieved by heating the glass or warm air with electric heating wires. Of course, it will also consume power and further reduce battery life. 3. Charge in time to avoid over-discharge Try to charge the vehicle in time after using it every day. At this time, the battery temperature is relatively high, ensuring high-power charging of the battery and providing protection for the next day's travel. New Car should avoid being idle for a long time. The self-discharge characteristics of the battery may cause over-discharge and affect the battery life. 4. The impact of tire pressure on cruising range Due to the principle of thermal expansion and contraction of air, when the temperature drops, the tire pressure will drop accordingly, causing the tire to contact the ground area to increase

Winter is here, and in this season, Used Car consume much more power than in other seasons. As a driver, you need to master some common problems in winter riding so that your battery can eliminate the risk of running out of power or even failing in winter. Try to minimize turning on electrical appliances in Used Car before the engine starts. Power supply, which will also cause the loss of this mechanical equipment. Check whether the lighting function is turned off after parking. Forgetting to turn off the lights is one of the more common reasons for battery exhaustion, so you need to be careful when checking the lighting function. Especially for the lights of lighting equipment, there are generally three gears to choose from. If you don't go for a long time, avoid overcharging and discharging the rechargeable battery. Used Electric Car manufacturers tell you that if you don't need it for a long time, there can be a standard to park in an underground garage to prevent the ultra-low temperature environment from exhausting the charging and discharging capacity of the rechargeable battery, and to ensure the specificity of the battery. If you need to park outdoors for a long time in an ultra-low temperature environment, you can unplug the negative pole of the battery and turn off the power supply to prevent the battery from overcharging and discharging. Before the engine starts, the power consumption of Used Electric Car equipment comes from the battery. Starting an Used Electric Car under such a load will greatly increase the pressure on the battery, and the power consumption of the starter motor will be very large when starting.